|
CC-MAX
LOW-PROFILE Elevator Bucket:
Nylon |
|
 PATENT
PENDING
The
CC-MAX Heavy Duty elevator bucket is a
grade above older CC style buckets. It has the
traditional shape, fill and discharge
characteristics, with the thicker wear surfaces
our buckets are famous for. The result is longer
life and greater performance. CC-MAX buckets are
direct replacements for CC and other standard
bucket styles. Standard spacing is nominal
projection plus 2” inches. Exceptional
performance in most agricultural applications.
The CC-MAX Low-Profile bucket has a reduced height modification for closer vertical spacing on the belt. The low profile system allows more buckets per foot of elevator belt. When upgrading to CC-MAX Heavy Duty Low-Pro buckets, horsepower requirements must be evaluated due to increased capacity. |
| |
DARE TO COMPARE
HOW DOES YOUR BUCKET STACK UP?
|
Disclaimer: The thickness
measurements were taken from 9” x 5” polyethylene
elevator buckets. The thickness measurement testing was
conducted by GeoTesting Express, an independent testing
laboratory. Weight and capacity figures were taken from
published literature. Copies of the testing reports are
on file at Maxi-Lift.
* Tapco and blue buckets are registered trademarks of
Tapco Inc. Percentages are measured gains over the Tapco
bucket.
|
|
COMPARISON TO CC-HD PLASTIC BUCKETS |
|
Most Cost Efficient |
The CC-MAX bucket is designed to give
you more material in the high wear areas
for more strength and longer life. |
|
Stronger and Thicker |
The CC-MAX front lip and corner are more
than 20% thicker for longer life. |
|
Increase Capacity |
Higher rated capacity from the start.
Thicker corners and lip to maintain
rated capacity longer. |
|
Interchangeable |
Directly interchanges with any CC style
plastic or metal bucket. |
|
Best Materials |
Made from the best Prime Virgin
materials (Polyethylene, Nylon, and
Urethane). |
|
Perfect Discharge |
Uniform discharge over a wide range of
speeds. |
|
Why was the CC-MAX designed?
Over the last several years, customers
kept asking Maxi-Lift for a CC style
bucket that would last longer. They
wanted a bucket with more strength,
longer life, and more capacity. They
told us they were tired of replacing
buckets every few years because the
bucket life was less than they expected
out of their buckets.
Why is it better than older CC designs?
There are several key reasons why the
CC-MAX is better than previous designs.
With 20%+ thicker front lip corners, the
bucket will last longer, maintain
capacity longer, and give you the
toughness to handles today's harsher
applications. The bucket is also
designed with more capacity to help you
move more bulk material faster within
the same bucket elevator.
-
20%+ thicker front lip
-
20%+ thicker front corners
-
5%+ more capacity
Why are the corners and lip thicker?
The front corners and front lip are
20% thicker to give you longer life.
When a bucket wears, the front lip and
corners take the most abuse. As your
bucket wears, these areas will wear down
to a point in which the entire front lip
will rip out of the bucket leaving you
with little or no capacity. The CC-MAX
eliminates these problems by giving you
more material in the places the bucket
| | | | |
