RECOMMENDED INSTALLATION
 
Directions for Proper Elevator Bolt Torque on Belt
1. To tighten the nuts, use a torque wrench that will “click” out when proper setting is reached.
2. Run the elevator with the buckets empty for 4 hours.
3. Check all bolts to insure that the proper torque is maintained.
 

RECOMMENDED TORQUE FOR ELEVATOR BOLTS
SHANK DIAMETER STEEL STAINLESS
in./lbs. kgm/m. ft./lbs. in./lbs. kgm/m. ft./lbs.
1/4" 50 .57 4 86 .99 7.16
5/16" 96 1.10 8 177 2.04 14.75
3/8" 180 2.07 15 - - -



Recommended Bucket Installation
*A locking device should be used on all elevator bucket installations.
 

Elevator Bolts
Washers & Spacers
Nuts
Recommended Installation
 

Elevator Bolts & Accessories Section
Complete Catalog
Comprehensive Line Card
View All Catalogs

16400 Midway Road, Addison, TX 75001 USA
P.O. Box 700008, Dallas, TX 75370-0008 USA
Toll Free 800-527-0657  ·  Local 972-735-8855  ·  Fax 972-735-8896
© Copyright 2008 Maxi-Lift, Inc. All Rights Reserved.

Designed & Hosted by:
©2006-2008 MarketCenter Technologies, Inc.